How to paint OSB indoors with your own hands

How to paint OSB indoors with your own hands

Once again, using OSB slabs for finishing your house, I wondered, and how can I paint this material if it is used indoors? After all, there are often times when painting the surface is the most optimal design option. Despite all the nuances that need to be considered when painting OSB boards, this way of design can be called less costly and difficult than other options for finishing. Today I will tell you how the process of staining takes place and what mixtures should be selected for OSB slabs.

How to paint OSB indoors with your own hands

Krasim OSB indoors

Small acquaintance

Even before working with these plates, from my friend, I learned that OSB is a composite element that is created by gluing wood chips. For these purposes, polymers and various resins are used.

How to paint OSB indoors with your own hands

How to paint OSB inside the room

There is also a classification of this material, which should not be forgotten when purchasing OSB plates:

  • OSB 1 - suitable for interior decoration of a room where there is a low level of humidity
  • OSB 2 - for rooms with normal humidity
  • OSB 3 - for higher humidity and overlap, which can get wet
  • OSB 4 - are the most moisture resistant, they are used for load-bearing structures

For my room I used OSB 3 - together with OSB 2 they are best suited for interior decoration. Having decided once again to be safe, I chose this class, but if you are sure of the humidity of the room, then you can use the second class, it is usually a little cheaper in value.

What is the advantage of staining

How to paint OSB indoors with your own hands

Painting OSB

In addition to the ease of painting, there are a few other advantages that paint has, if it is used for an oriented chipboard:

  1. The paint serves not only as a decorative finish for a rough element, but also protects it from moisture. Since water can not get into the base plates, then the deformation of the plates becomes impossible
  2. Using paint, the OSB texture is effectively hidden. Since the building material does not look attractive enough, it requires subsequent decorative finishing

Important! The use of the material is better suited for interior decoration, because due to the tendency to deformation under the influence of moisture, it must be carefully protected from negative influences.

When I presented for myself the composition of the OSB plates, I realized that the pigments for them would be the best. Dissolving in the organic such a layer, it is ready to serve as a strong coating for the slab, and with a long service life, the need to update the finish more often than once every 8-10 years will disappear altogether. Although such materials are often used in facade works, pay attention to the products "InternationalPaint", "SigmaCoatings", "Sterling".

When I presented for myself the composition of the OSB plates, I realized that the pigments for them would be the best. Dissolving in the organic such a layer, it is ready to serve as a strong coating for the slab, and with a long service life, the need to update the finish more often than once every 8-10 years will disappear altogether. Although such materials are often used in facade works, pay attention to the products "InternationalPaint", "SigmaCoatings", "Sterling".

The most popular for painting plates are oil compositions. They are well adhered to wood, and also are viscous enough. It is this property that prevents the paints from being absorbed into the material too much. Forming a good coating, this option can serve the finish in your room on average 3-5 years. Despite the fact that oil paints are considered by some to be an outdated material in the painting of walls, they are quite qualitative and diverse. Use in order to paint OSB quality materials, for example, "Syntilor" or "Coloray" and then you will necessarily be pleased with the result of your actions.

If we talk about alkyd enamels, then they can be used for painting. However, having the property of soaking is much stronger than its predecessors, you will have large ones during the acquisition of paint. After all, the consumption of material will increase because of the absorption of the surface of moisture. Alkyd enamels do not need to be coated with a finishing coat of varnish - this is a significant plus that can smooth out the costs of the paint used.

I do not recommend water-based paint to be used for painting OSB boards. Due to the fact that it absorbs a lot of water, which is contained in the coloring composition, it can swell and deform. Such a process will lead to a complete substitution of the damaged OSB slabs. Although the class of material that I chose to finish my room and allows the use of water-based paints, I still refused them.

Preparation of roughing and painting

How to paint OSB indoors with your own hands

The AXIS in the house is painted independently

As usual, we need to prepare the surface for painting and in this case we grind the plates using sandpaper or a grinder. If there are flaws and unevenness, as well as hats of self-tapping screws with which the OSB was attached, we shpaklyuem all known material. When the putty completely dries, then clean it - before painting the surface should be as flat as possible. Can be used as a mixture on an oil-based adhesive.

The priming of OSB slabs is done with the help of water lacquer. Having divorced it 1k10, we cover the material and wait for it to dry out. You can also buy an adhesive primer, which serves as an insulating layer between the paint and the surface to be painted. The very coloring of the OSB will not make any problems. For me it was generally a trifle, because painting of various objects was carried out by me repeatedly. But if you're wondering how the painting was going with me:

  1. First of all, using the brush, I painted the entire area of ​​the plate, I did not regret paint on the edges
  2. Then the roller spread the paint over the villi
  3. In one direction and with the help of a roller painted the material, applying first the first and not very thick layer
  4. Left the walls to dry out, and then applied a second layer - do not forget that between these processes there should not be less than 8 hours of take-off
  5. Dye paint is applied in an arbitrary amount - do as much as necessary to achieve the desired result

How to paint OSB indoors with your own hands

We paint OSB with our own hands

If you think how to paint OSB outside your house, then clearly choose the materials that are used for exterior painting of the tree. In this process, it is important to improve the quality of the OSB and color it with high-quality paint.

Adhering to all the nuances and technologies, using only quality mixes, the entire design process will be very simple and fast for you, so do not be afraid to start a new job that you did not dare to do beforehand.

Leave a Reply

Your email address will not be published. Required fields are marked *


*

3 + 5 =